树脂定型机
压光机
连续预缩机
自动对线剖布机
连续预缩机SF1 COMPRESSIVE SHRINKING MACHINE MODEL:SF1
布匹防缩利器 FABRIC SHRINKAGE CUTLERY
★本机系改善布匹缩水加工专用梭织布防缩之机械,针对不同布料,使用不同压力达到从O一15%之缩率控制,增加布匹之手感,并利用羊毛毯与布产生热交换。
★本机分2系列:
(1)标准机种统一驱动。
(2)为各单元机独立驱动以变频同步连动控制。
★我们提供机台上全部蒸汽配管所需之开关阀/减压阀/蒸汽分配器连接至各部,如接至入布蒸汽及接至预缩轮、烘乾轮及毛毡烘乾轮之入汽设备,减压阀可调适蒸汽压力至回转接头,并由各滚轮排出至却水器达到冷凝水排出。
★This machine is improving fabrics shrinkage for woven, it's controlled rate of compacting between 0-1 5% in
different pressure for different fabrics.
★Two series :
(1 )Standard of main driver.
(2)Independent driver by synchronized operation control.
★We provide all the equipments required for the steam piping on the machine bench, such as switch valve,pressure    reducing valve and steam distributor to be connected to various parts, for example, fabric entry steam box and the steam inlets of shrinking roller, drying  roller and felt drying roller; the pressure reducing valve allows the regulation of the pressure of the steam leading to the rotary joint and passing through the roller to be condensed in the steam condenser and then  drained off.
喷蒸汽 STEAMING ROLLER
■喷蒸汽采用不锈钢制造,设有喷汽装置及喷泉水装置,咂蒸汽箱本厂采用汽水喷泉雾混合装置,可调整控制喷量,使布匹表面均匀湿润。
Steam box is made by stainless steel,it's includes steam jetting device and water jetting device, steam box we used the condensate spray mix device it can adjust spurt amount, causes the degree of the wetness of the fabric to be more uniform and stable to attain the maximum effect of pre-liminary shrinking。
预缩机最主要设备,分为橡胶毯及羊毛毯两种:
Rubber felt & endless, felt are the main device of compressive shrinking M/C:
羊毛毯: 采用6%一8,1;厚度之羊毛毯,经烘乾轮之加热与织物产生热交换作用,达到压平,手感等效果。
The felt thickness is 3m/m-8m/m, there is heat exchange between drying roller and cloth in order to pressing smooth manner and increasing surface soft.
像胶毯: 厚度约67—70mm分为:①天然胶毯 ②合成胶毯
平均寿命:天然胶毯约600万码/条 合成胶毯约800万码/条
Rubber Belt: Its thickness about 67-70mm,has two items:
①Natural Rubber Belt ②Synthetic Rubber Belt
Average Life: Natural Rubber Belt:6,000,000 yard/rod
Synthetic Rubber Belt:8,000,000 yard/rod
控制面板 Control Panel
■於控制面板上,已将预缩机之所有功能设计於面板上,举凡缩率、速度、压力之调整及磨橡毯构造均可简单且明了的控制。There are all functions of shrinkage M/c designing on main control panel,including rate of compacting guide speed, pressure adjust and grinding rubber belt device.
防缩机 SHRINKAGE DEVICE
纬纱调整器 WEFT STRALGHTENER
采电动控制,来校正纬纱之斜度。
Use electrical control to correct the gradient of weft.
1.张力设备 Tension Device
2.自动对中设备 Auto Centering Device
3.蒸汽箱 Steam Box
4.预干轮 Pre-Drying Roller
5.纬纱纱调整器 Weft Straightener
6.磨胶轮 Rubber Grinding Roller
7.挤缩调整设备Shrinking Adjust Device
8.橡胶毯Rubber Felt
9.烘干轮Drying Roller
10.冷却轮Cooling Roller11.羊毛毯Felt
12.摆布设备Plait Device
规格 SPECIFICATION
型机(MODEL) SF1
机械速度(MACHINE SPEED) 0-60M/MIN
罗拉宽度(ROLLER WIDTH) 1900MM 2000MM 2200MM 2400MM
橡胶毯宽度(RUBBER WIDTH) 1800MM 1900MM 2100MM 2300MM
工作宽度(WORKING WIDTH) 1700MM 1800MM 2000MM 2200MM
总马力(HORSE POWER) 30HP 30HP 35HP 40HP